TR-1172-TPU Granule

      •  

        TPU GRANULE

        CODE: TR-1172

        DESCRIPTION

        TR-1172 is polyester-based TPU, in form of transparent or slightly yellowish granule with high tensile strength, excellent resilience, outstanding abrasion resistance, and flexibility under low temperature.

         

        APPLICATION

        Coating or coagulation for synthetic leather

         

        PROPERTY

        PROPERTY

        METHOD ASTM

        UNIT

        1172

        Hardness

        D2240

        Shore A

         

        D2240

        Shore D

        72±3

        Specific gravity

        D792

        g/cm3

        1.22

        100% modulus

        D412

        MPa

        28

        300% modulus

        D412

        MPa

        37

        Tensile strength

        D412

        MPa

        47

        Ultimate Elongation

        D412

        %

        300

        Taber abrasion

        D1044

        mg

        60

        Tear strength

        D624

        N/mm

        250

        MI

        D1238

        g/10min

        30-60

        Glass transition temperature

        D3417

        -20

         

         

         

         

         

         

         

         

         

         

         

         

         

        Note: ①H-18 wheel, 1000gm weight for 1000 cycles. ②10℃/min of Tg testing rising rate.          


        PROCESSING TEMPERATURE

        To achieve the best result, it is suggested to pre-heat the product for 2-3 hours under 80~90℃, in a hot air circulatory or vacuum dryer.

         

        USAGE

        Add 30% TR-1172 in 70% DMF or the other solvents, stirring with high speed mixer until all TPU particles dissolve in the solvent. You can adjust the viscosity by adding some solvent in the solution according to your requirements.

         

        DISCLAIMER

        The information provided here is for reference only. The specification will be provided in the quality certificate or in the contract. It is the user’s responsibility to test the material and its suitability for a process. We have no control over what another party does with the material and we cannot take any responsibility for another party’s action. Nor will we be responsible for any indirect damages while using our products. The user is welcome to contact our customer and technical service center with questions on our products.

         

        DECLARATION

        All information and advice are provided without warrant including in the case of the rights of third parties, the client being at all times responsible for testing the products and for their application, use and processing. All products are sold subject to Shanghai Tiran Industrial Co. Ltd. General Terms of Business.